N - Standard Pump
T - Open Hopper Pump
D - Dosing Pump
CS - Food Grade Pump
E - Vertical Pump
M - Macerator Pump
S - Smart Converying
CO - Control System Pump
Basic Information
Drivers & Baseplates
Shaft Sealings
Accessories






   Basic Information
HOME > 제품소개 > Basic Information
Operating Principle





Seepex 모노펌프는 로타(스테이터)의 연속적인 회전운동에 의해 안정된 공간을 이송하는 특수펌프입니다.

seepex pumps belong to the group of rotary positive-displacement pumps. The characteristic of these pumps is the special arrangement and design of the two conveying elements and the resulting sequence of motions. The eccentric input screw features a circular cross section and performs an oscillating rotary motion. the rotor.
The stationary second pumping element, the stator, features an internal screw of the same geometric dimensions but with the double number of helices. The helices are staggered by 180 degrees and feature the double pitch length.

The Tricam geometry is characterized by a double-helix rotor in an elliptic cross section that rotates in a triple-helix stator featuring the same geometric ratio. As compared to the rotor, the number of helices of the stator is 1,5 times higher. The helices are staggered by 120 degrees and feature 1.5 times the pitch length.

Due to the different number of helices and the different pitches of the conveying elements, cavities are formed that alternatingly open and close steadily with the rotary motion of the rotor. In this case, the conveying medium is continuously delivered from the suction side to the pressure side. Due to the geometric design and the continuous contact between the two conveying elements, sealing lines are formed that provide an absolute seal between the suction and pressure sides with any rotor position, even when idling. This provides for the high suction of the pump and the high pressure build-up is almost independent of the speed. The pumping direction can be reversed by changing the direction of rotation.




  서울특별시 금천구 벚꽃로 298, 대륭포스트6차 409호
TEL: 02-2083-5580~3      FAX: 02-2083-5584      e-Mail: ch2003@paran.com